TPE Bond with PP/PE


The following TPE granule could be boned to PP or PE.

tpe-pp-material

Overmolding is the injection molding process where one material (usually a TPE) is molded
onto a second material (typically a rigid plastic). If properly selected, the overmolded TPE will
form a strong bond with the plastic that is maintained in the end-use environment. The use
of primers or adhesives is no longer required to achieve an optimum bond between the
two materials.

Physical Properties
Product Mode Hardness Specific Gravity MI Tensile Strength Elongation at Break Tear strength
HC20-50G04000 50 0.89 12 70 650 38
HC20-60B05000 60 0.88 2.4 72 630 28
HC21-45P03200 47 0.91 26 38 538 17
HC21-60P02200 61 0.91 3.5 45 480 26
HC22-60P02200 59 0.99 32 38 420 19
HC22-20P05200 18 1.00 2.7 18 560 9
HC23-80P05200 82 1.08 31.8 117 525 38

Chemical Safety:ROHS/FDA/PAHS/EN71-3/CRSIA/REACH


4 comments on “TPE Bond with PP/PE
  1. jeff Brown says:

    is it possible to overmold neoprene with TPE

  2. chandan says:

    i have manufacturer of rubber and [plastic product now i have manufacturering of pp bonding with tpe seals. now i have use tpe 2.00 ton per day so please sendqoutaion and sampale

Send an Inquiry